Material Automation (Thailand) Co., Ltd. organized “Digital Manufacturing Solution for Smart Connected Product Manufacturing (Industrial 4.0)” at AMTA Spring Country Club, Chon Buri Province on the 23^rd May 2019. There were many participants in this event.

The seminar contained two topics as in “Engineering Innovation in the Age of Industry 4.0” and “How to make your industry become smart through IoT (Internet of Things) and AR (Augmented Reality)”. The speaker of the two topics was both skilled and experienced in such technologies. At the end of the seminar there was a lucky draw and the top prize was an iPad (Wifi).

Mr. Duminda Gunathilaka PLM & IOT Solution Sales Manager, Material Automation (Thailand) Co., Ltd. said that this seminar was aimed to give an opportunity to participants to listen to the seminar, have a conversation and share their experiences of using IoT technology in order to improve the manufacturing efficiency in the current industrial age and to extend the manufacturing potential to reach the highest level of efficiency in the manufacturing process.

Nowadays, many manufacturers are trying to improve their performance continuously. However, the systems and the equipment in the manufacturing factories and the manufacturing process have evolved in different directions. Therefore, the choice of the modern equipment which is worth the investment and flexible or compatible to work with other machines is a big challenge and obstacle to achieve excellence in the operation.

Mr. Duminda continued that although many manufacturers use new technologies in the manufacturing processes, there is too much amount of data from the automation systems, robots, NC, PLC, digital measuring tool, sensor camera, wireless devices and other tools. The large amount of data from the new manufacturing process means that it is almost impossible for a traditional manufacturing process to collect the data and to analyze any problems during the manufacturing process.

Material Automation株式会社は令和元年５月２３日によりﾁｮﾝﾌﾞﾘｰ県内アマタスプリングカントリークラブにて「Digital Manufacturing Solution for Smart Connected Product Manufacturing (Industrial 4.0」セミナーを開催し、大幅なお客様がご参加頂きました。

主な話題を2つ目次に分け、豊富な知識・様々な経験を得ている講師によって「生産革新インダストリー4.0向けについて」及び「IoT (モノのインターネット) とAR (Augmented Reality拡張現実)について」を開催します。さらに、本セミナー終了後に大抽選会１等：iPad(Wifi)も行います。

Material Automation（株）PLM & IOT Solution営業課長ﾂﾞﾐﾝﾀﾞ　ｸﾞﾇﾁﾗｶ　氏によると本セミナー参加者の中から個々集められた具体的な課題を取りあげ・IoTを使った課題解決等を目的とした。従って、現代の製造稼動率を増加し、より生産工程効率化にも繋がっています。

昨今、各メーカ様には社内の効率化継続向上を目指し、各工場内・工程内に多様性作業進化を伴って、最新技術設備導入・コストの極小化・高柔軟度仕様・他の設備との応用性を持ち機械等が必要とみなされ、ﾁｬﾚﾝｼﾞ的一歩にて巨大課題を超えられなければなりません。

つづきましては、たとえ工程内に最先端技術設備を設置したと言っても、旧型ﾃﾞｰﾀ処理ｼｽﾃﾑとなると、自動化ｼｽﾃﾑ・ロボット・NCﾏｼﾝ・PLC・ﾃﾞｼﾞﾀﾙ測定器・検知ｾﾝｻｰ・無線LAN測定器・その他からの多大なﾃﾞｰﾀを収集し、問題推測・解析と言うような対応には出来かねますと言われました。 “現在、モノのインターネット接続技術：IoTは生産を変革し、製造業企業にとって効率化向上行為につながる革新を生み出す機会となり、統計士・業界の専門家による、この新技術を