คำอธิบาย
-
For optimal performance, it is recommended to adjust runout of outer points and chisel with a maximum of 0.02 mm exceeded runout will have influence on drill performance, tool life and hole quality.
- LOGIQ3CHAM drills can be used either on milling centers or lathe machines.
- LOGIQ3CHAM drills can be used on sloped surfaces up to 12°. When drilling sloped surfaces of up to 12°, reduce feed rate by 30-50% during penetration up to 5 mm depth; or use a spot or pre-hole drill to avoid drill deviation or poor drill performance.
- Interrupted cut has a direct influence on hole accuracy, quality and tool life
