Saving & Conservation Energy

Share with               Nowadays, the world increasingly pays attention to “renewable energy” day by day and there are many attempts to use a renewable energy instead of the conventional energy converted from fossil fuels. To obtain the energy from fossil fuels, the transformation process can be the cause of the global warming problem. In case of […]

Share withArticle by: Pornphimol Winyuchakrit (Ph.D.) & MEGA Tech School of Energy Environment and MaterialsKing Mongkut’s University of Technology Thonburi (KMUTT) Now a day, motors are main electrical energy consumption equipment in Industry and commercial buildings.  Motor efficiency measurement is likely to observe the energy consumption and the mechanical power output at working conditions.  In […]

Share withArticle by: Pornphimol Winyuchakrit (Ph.D.) & MEGA Tech According to the latest report, the Third Biennial Update Report (BUR3), submitted to the United Nations Framework Convention on Climate Change (UNFCCC), the national emission inventory is categorized into four sectors, including Energy, Industrial Processes and Product Uses (IPPU), Agriculture, Forestry and Other Land Use (AFOLU), […]

Share withArticle by: Pornphimol Winyuchakrit (Ph.D.) In the present, all already know the “COVID-19” pandemic, which is one of the world’s severe plagues. This pandemic began in the late 2019, and it has spread widely and intensified since early 2020. Countries have been locked down to limit the risk areas of the spreading. Undoubtedly, the […]

Share withArticle by: Pachern Jansa (Asst.Prof.), School of Engineering, Sripatum University The concept of Wireless Power Transfer (WPT) through electromagnetic coupling has existed on the pioneering work of Nikola Tesla (1891). Inductive (or wireless) charging (WC), is a method of charging batteries without the need for users to plug the vehicle/device into a charging point […]

Share withArticle by:  Panida Thepkhun (Ph.D.), Researcher Thailand Institute of Scientific and Technological Research Renewable energy from biomass has been promoted as a fuel for heat and electricity production instead of fossil-based resources for achieving energy security, environmental impact mitigation target as well as sustainable development goals. Biomass resources such as wood, sawdust, agricultural waste, […]

Share withArticle by:  Unnat Pinsopon, Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang. Hydraulic power transmission is used in wide range of industrial applications from heavy machining to aviation flight control.  The power is transmitted using pressurized hydraulic oil as media, and the power transmission within the system is shown […]

Share withArticle by: Natthawut Ruangtrakoon, Phd. Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang                Air conditioning system (A/C system), used for large commercial buildings and shopping malls mostly has water chiller, which is used to produce cool air. This cool air will be then distributed to a conditioned space. In […]

Share withArticle by: Pornphimol Winyuchakrit (Ph.D.)Sustainable Energy and Low Carbon Research UnitSirindhorn International Institute of Technology, Thammasat University Rapid decline in cost of energy production from RE technology is a key accelerator in the energy transition. In 2014, cost of electricity generation from wind was 0.11 dollars per kilowatt-hour ($/kWh) while the cost from solar […]